HomeSitemap ReferencesAbout SelkaContact usNewsletter
  

 Products:  Engineering Mechanics and Machine Elements » Machinery Diagnosis » PT 500.04
Manufacturer Info
G.U.N.T Hamburg
Other products
Products



View All Products
Your Inquiry
Your inquiry cart contains 0 items
Manufacturers


View All Manufacturers
Who's online?
There currently are 12   guests online.
previous Product12/14 next

PT 500.04: Computerised Vibration Analyser

Print Ask to this Articlel

Computerised Vibration Analyser

Computerised Vibration Analyser Computerised Vibration Analyser Computerised Vibration Analyser

Product Details


Technical Description 
 
The computerised vibration analyser was developed specially to support analysis of machinery diagnosis experiments of the PT 500 series. The analyser can also be used in many other vibration experiments (such as TM 150).
The system comprises two acceleration sensors, a measurement amplifier with adjustable gain, a PCI data acquisition card with a high sampling rate, and the analysis software.
The analysis software offers the following features: Two-channel oscilloscope for investigations in the time range; two-channel spectrum analyser for investigations in the frequency range; vibration measuring device; envelope analysis for bump effects and roller bearing damage; travelling filter to record run-up curves; orbit display; and a balancing module for field balancing of rigid rotors in 1 and 2 planes.
The software permits various analytical methods to be applied to a vibration signal and compared in terms of their efficacy. This enables the advantages and disadvantages of the various techniques to be effectively discovered. The balancing process is presented step-by-step.

The software features an intuitive user interface, and is highly user-friendly. An online help function provides guidance on the various functions. Measurement results can be printed out.

Cables, brackets and fixings are supplied.

Learning Objectives / Experiments

Within the context of the experiments in the complete PT 500 series, the following learning can be covered:
- Familiarisation with vibration signals
- Correct application of FFT analysis
- Measurement of rotation speed, vibration travel,
  vibration velocity and acceleration
- Assessment of the vibration state of a machine
- Damage analysis of roller bearings and gears by
  means of envelope spectra
- Detection of cracks in shafts by means of run-up
  curves and order analysis
- Measurement of imbalance vibrations and field
  balancing of rigid rotors in 1 and 2 planes
 
Features
 
* Versatile, powerful software for vibration analysis1
* Supports all machinery diagnosis experiments of
  the PT 500 series1
* Suitable for field balancing of  rotors in 1 and
  2 planes

Specification

[1] Computerised vibration analyser for representation and evaluation of experiments with the PT 500 "Machinery diagnosis" series
[2] 2 acceleration sensors to record vibration travel, vibration velocity and acceleration
[3] Optical sensor to record rotation speed
[4] 2-channel measurement amplifier with adjustable gain
[5] Analysis software programmed in LabVIEW
[6] Software features: 2-channel oscilloscope;
2-channel FFT analyser; envelope analysis; run-up curve and order analysis; 2-plane field balancing
[7] Suitable for general vibration measurement tasks
[8] Stackable storage box for all components
 
Technical Data
Acceleration sensor
- frequency range : 1...10kHz
- sensitivity: 100mV/g
- resonance frequency: 32kHz
Optical speed sensor
- sampling width: 3...150mm
- laser class II, 675nm
PCI card, 16-channel
- resolution: 16-bit, sampling rate: 500kHz
Measurement amplifier
- adjustable gain: x1, x10, x100
- l x w x h: 240x210x100mm
- powered by 12VDC power supply unit
Software runs under Windows XP

Dimensions and Weight
l x w x h : 600 x 400 x 120 mm (box)
Weight : approx. 6 kg
 
Connections
120V, 50/60Hz, 1 phase or 230V, 50/60Hz, 1 phase or 120V, CSA, 1 phase

Scope of Delivery
2 acceleration sensors
1 speed sensor with holder
1 amplifier
1 CD with evaluation software
1 PCI card
1 set of connecting cables
1 combination wrench, AF 13
1 manual
 
Order Details
052.50004  PT 500.04  PC Computerised Vibration
                    Analyzer


SELKA GmbH, Hamburg
Grindelallee 188, 20144 Hamburg / Germany
Tel.: + 49 (0) 40 343453 |  Fax: +49 (0) 40 63657075
E-Mail:
info@selkagmbh.com   |  Internet: http://www.selkagmbh.com

Site generate in 0.163 seconds.