HomeSitemap ReferencesAbout SelkaContact usNewsletter
  

 Products:  Engineering Mechanics and Machine Elements » Machinery Diagnosis » PT 500.16
Manufacturer Info
G.U.N.T Hamburg
Other products
Products



View All Products
Your Inquiry
Your inquiry cart contains 0 items
Manufacturers


View All Manufacturers
Who's online?
There currently are 43   guests online.
previous Product8/14 next

PT 500.16: Crank Mechanism Kit

Print Ask to this Articlel

Crank Mechanism Kit

Crank Mechanism Kit Crank Mechanism Kit Crank Mechanism Kit

Product Details


Technical Description 
 
Crank drives are frequently used in compressors and pumps. They cause vibration due to the oscillating masses and forces. Under the alternating stress in the drive mechanism, bearing play, for example, can generate shock impacts with high-frequency exciter spectra. In addition, free mass forces generate harmonic vibrations due to their non-linear kinematics.
 
The PT 500.16 accessory set enables the stroke, mass balance and bearing play on the crosshead to be adjusted. The speed is adjusted using the base unit PT 500. Gas pressure forces such as occur in compressors or combustion engines can be simulated using springs. Experiments with gas pressure forces require higher torques which are attained by reducing the speed of the drive motor from the base unit PT 500. This reduction is achieved either with the PT 500.14 belt drive or the PT 500.15 gear unit. The transmission of alternating torque in toothed gearing mechanisms can be investigated together with accessory set PT 500.15 (for investigating damage to gears).
 
The accessory set is mounted on the base plate of the machinery diagnostic base system PT 500.

To measure and evaluate the experiment, the computerised vibration analyser PT 500.04 is required. It includes all the necessary sensors, a measurement amplifier and analysis software to record the vibration phenomena.
 
Learning Objectives / Experiments

- Experimental modal analysis of mechanical
  systems
- Influence of bearing play and shock impact
- Inconsistent torque characteristic
- Wear measurement on piston rods
- Understanding and interpreting frequency spectra
- Use of a computerised vibration analyzer
In conjunction with PT 500.15:
- Transmission of alternating torque in toothed
  gearing mechanisms
In conjunction with PT 500.14 or PT 500.15:
- Influence of gas pressure forces on the vibration
  spectrum 
 
Features

* Vibrations of crank drives1
* Bearing play or slack in oscillating machine
  components

Specification

[1] Investigation of the vibrations of crank drives
[2] Crank drive with adjustable stroke
[3] Interchangeable bearing bushes permit simulation of bearing play
[4] Springs simulate gas pressure forces
[5] Can be used together with gear damage accessory set PT 500.15
[6] Belt drive PT 500.14 or gear unit PT 500.15 required for experiment with gas pressure forces
[7] Accessory set for PT 500 machinery diagnostic training system
[8] Stackable box for all components
 
Technical Data
Stroke: 50 - 75 - 100mm
Balance mass total: 490g, rated for operation with 50mm stroke
Bearing play: 0...1mm
Pressure spring
- relaxed length: 170mm
- spring stiffness: R=0.55N/mm
 
Dimensions and Weight
l x w x h : 600 x 400 x 170 mm (box)
Weight : approx. 12 kg
 
Scope of Delivery
1 crank drive
2 springs
2 balance masses
1 set of tools
1 storage box with foam inlay
1 instruction manual

Order Details
052.50016  PT 500.16  Crank Mechanism Kit

Available accessories
 
PT 500 -- Machinery Diagnostic System, Base Unit
PT 500.02 -- Instrumentation Kit
PT 500.04 -- Computerised Vibration Analyser
PT 500.14 -- Belt Drive Kit
PT 500.15 -- Damages to Gears Kit
 
Alternative products
 
TM 180 -- Balance of Reciprocating Masses

SELKA GmbH, Hamburg
Grindelallee 188, 20144 Hamburg / Germany
Tel.: + 49 (0) 40 343453 |  Fax: +49 (0) 40 63657075
E-Mail:
info@selkagmbh.com   |  Internet: http://www.selkagmbh.com

Site generate in 0.173 seconds.