HomeSitemap ReferencesAbout SelkaContact usNewsletter

 Products:  Engineering Mechanics and Machine Elements » Machinery Diagnosis » PT 500.15
Manufacturer Info
G.U.N.T Hamburg
Other products

View All Products
Your Inquiry
Your inquiry cart contains 0 items

View All Manufacturers
Who's online?
There currently are 17   guests online.
previous Product7/14 next

PT 500.15: Damages to Gears Kit

Print Ask to this Articlel

Damages to Gears Kit

Damages to Gears Kit Damages to Gears Kit Damages to Gears Kit

Product Details

Technical Description 
The PT 500.15 accessory set-up is used to simulate typical damage to gears and study its effects on vibration behaviour. Various gear sets with tooth damage are supplied for this purpose. Undamaged gear sets are provided for comparative purposes. The difference between spur toothed and helical gearing can also be demonstrated. The influence of the centre distance and backlash can be studied using adjustable bearing plates. The type of lubrication has a significant influence on the vibration signal, so grease or gear oil can be used for lubrication. The housing, with holes to accommodate sensors, is used for vibration experiments. The transparent housing cover allows the gear to be observed in operation without taking vibration measurements.
The PT 500.05 brake and load unit will be required to subject the gear unit to load.
The accessory set-up is mounted on the base plate of the machinery diagnostic base system PT 500.
To measure and evaluate the experiment, the computerised vibration analyser PT 500.04 is required. It includes all the necessary sensors, a measurement amplifier and analysis software to record the vibration phenomena.  
Learning Objectives / Experiments

- Identification of gear damage from vibration
- Influence of gearing type
  + spur toothed
  + helical
- Localisation of damage
- Influence of lubrication
- Influence of centre distance and of backlash
- Understanding and interpreting frequency spectra
- Use of a computerised vibration analyzer
In conjunction with accessory set PT 500.12:
- Vibration analysis of bearing damage

* Vibration analysis of gearing damage1
* Vibration analysis of bearing damage (in conjunction
  with accessory set PT 500.12)1
* Fault localisation on gears


[1] Investigation of the vibration behaviour of gears
[2] Two-shaft gear unit
[3] 2 damaged and 2 undamaged gear sets
[4] Spur toothed and helical gearing, 4 gear sets in total
[5] Housing with sensor holes
[6] Transparent housing cover
[7] Gear can be lubricated with grease or oil
[8] Loading of experimentation set-up with brake and load unit PT 500.05
[9] Accessory set for PT 500 machinery diagnostic training system
[10] Stackable box for all components

Technical Data
Transmission ratio i: 1:3

Centre distance adjustable
Reference profile to DIN 867

Spur toothed gear sets
- gear wheel: 75 teeth on each, m=2mm
- pinion: 25 teeth on each, m=2mm
Helical gear sets
- gear wheel: 75 teeth on each, m=2mm
- pinion: 25 teeth on each, m=2mm
- helix angle: 10°

Dimensions and Weight
l x w x h : 600 x 400 x 320 mm (box)
Weight : approx. 25 kg

Scope of Delivery
1 gearbox
1 transparent housing cover
1 housing cover with sensor holes
4 gear wheels
4 pinions
1.5ltr motor oil SAE 10W 40
1 storage box with foam inlay
1 instruction manual

Order Details
052.50015  PT 500.15  Damages to Gears Kit

Available accessories
PT 500 -- Machinery Diagnostic System, Base Unit
PT 500.02 -- Instrumentation Kit
PT 500.04 -- Computerised Vibration Analyser
PT 500.05 -- Brake & Load Unit
PT 500.16 -- Crank Mechanism Kit

SELKA GmbH, Hamburg
Grindelallee 188, 20144 Hamburg / Germany
Tel.: + 49 (0) 40 343453 |  Fax: +49 (0) 40 63657075
E-Mail:   |  Internet:

Site generate in 0.151 seconds.