HomeSitemap ReferencesAbout SelkaContact usNewsletter
  

 Products:  Process Engineering » Mechanical Process Engineering » Mixing and Agglomeration » CE 255
Manufacturer Info
G.U.N.T Hamburg
Other products
Products
   High/Low Voltage Electrical Distribution Boards, Controls and SCADA-GPRS Systems Design-Production


   Engineering Mechanics and Machine Elements


   Mechatronics


   Thermodynamics, Heating and Sanitary Systems


   Fluid Mechanics and Hydrology


 Process Engineering
     Basic Control Systems
     Components and Calibration
     Process Control Trainers
     Industrial Process Control Systems
 Mechanical Process Engineering
     Separation Methods: Classifying and Sorting
     Separation Methods: Separation in a Gravity Field
     Separation Methods: Separation in a Centrifugal Force Field
     Separation Methods: Filtration
     Comminution
     Mixing and Agglomeration
     Storage and Flow of Bulk Solids
     Fluidised Beds and Pneumatic Transport
     Chemical Process Engineering
   Thermal Process Engineering
     Process Plants
   Water Treatment


   Automotive


   Apprenticeship workshop equipment


   Trainings Systems


   Measuring & Test Instruments


   CNC Control Software


   Biology / Anatomy


   Physics


   Chemistry


   Biology-Physics-Chemistry PC Based Systems



View All Products
Your Inquiry
Your inquiry cart contains 0 items
Manufacturers


View All Manufacturers
Who's online?
There currently are 16   guests online.
previous Product2/2 next

CE 255: Rolling Agglomeration

Print Ask to this Articlel

Rolling Agglomeration

Rolling Agglomeration Rolling Agglomeration

Product Details


Technical Description
The terms agglomeration, granulation and pelletisation designate the process of particle size enlargement of solids. This trainer was developed in cooperation with the Department of Mechanical Engineering and Process Engineering at the Niederrhein University of Applied Sciences in Krefeld. A powder (fine material) is continuously fed onto an inclined, rotating dish granulator. A pump delivers granulating liquid to a two-component nozzle. The liquid is atomised over the powder by compressed air. Starting from a small number of moistened particles, a rolling motion produces growing numbers of balls (agglomerates). The fine material in the moved layer tends to remain close to the bottom. It is lifted higher than the forming agglomerates by the rotary motion of the dish. The ball-shaped agglomerates roll along the surface of the layer. When they have attained a certain size, they drop off the rim of the disc. The agglomerates are collected in a tank. Two further tanks are provided for the solid material (for which powdered limestone is recommended) and the granulating liquid (sugar powder diluted in water). The mass flow of solid feed material, the flow rate of the liquid, the speed and the angle of inclination of the disc are adjustable. The compressive strength of the resultant agglomerates can be measured using a laboratory device or with accessory unit CE 255.01. To determine these and other key properties of the agglomerates, a balance and drying chamber are also recommended.
The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.

Learning Objectives / Experiments
- Learning the basic principle and method of operation of an agglomeration unit
- Agglomerate size and strength dependent on
  + mass flow of solid feed material
  + flow rate of liquid
  + ratio of solid to liquid
  + dish rotation speed
  + angle of inclination of dish
  + position of solid and liquid feed
  + selected solid
  + selected granulating liquid

Features
* Rolling agglomeration with a dish granulator
* Strength testing of agglomerates to assess the process
* Practical experiments on a laboratory scale
Specification
[1] Rolling agglomeration with a dish granulator
[2] Dish granulator with adjustable rotation speed and angle of inclination
[3] Metering device to adjust the mass flow of solid feed material
[4] Two-component nozzle to atomise the granulating liquid with compressed air
[5] Diaphragm metering pump to adjust the flow rate of liquid
[6] Air pressure adjustment by fine-control valve
[7] Position of solid and liquid feed adjustable
[8] Tanks for solid, granulating liquid and agglomerates

Technical Data
Dish granulator
- diameter: approx. 600mm
- rim height: approx. 120mm
- material: stainless steel
Dish drive motor
- power consumption: approx. 0.5kW
- speed: 0...50rpm
Diaphragm metering pump
- max. flow rate: approx. 0...2L/h
- max. head: approx. 20m
- pressure fine-control valve: 0...1bar
Tanks
- solid: approx. 10L
- granulating liquid: 5L
- agglomerates: 20L

Dimensions and Weight
l x w x h : approx. 1400 x 1200 x 1800 mm
Weight : approx. 180 kg

Connections
230V, 50Hz, 1 phase
Compressed air connection:  1...6bar

Scope of Delivery
1 trainer, 1 packing unit of powdered limestone, 1 packing unit of sugar powder, 1 set of instructional material

Order Details
083.25500  CE 255  Rolling Agglomeration

SELKA GmbH, Hamburg
Grindelallee 188, 20144 Hamburg / Germany
Tel.: + 49 (0) 40 343453 |  Fax: +49 (0) 40 63657075
E-Mail:
info@selkagmbh.com   |  Internet: http://www.selkagmbh.com

Site generate in 0.454 seconds.